Product

Back to the product page

Speciality elastomer products

FFKM

- FFKM: FFKM (AS PER ASTM D1418) is a perfluoro elastomer with high chemical resistance; it can withstand around 1600 different chemicals in their pure and aggressive form for a longer service life at high temperature.
- The FFKM raw material we use is manufactured and supplied by 3M, a world renowned company who have validated our Processing parameters for FFKM moulding finished components.
- Lower swell leads to less degradation thus reducing maintenance.
- High temperature resistance with low compression set results in longer service life.
- FFKM is used where AGGRESSIVE CHEMICAL ENVIRONMENTS are present, wherein other elastomers cannot sustain.
- FFKM is being used in SEMICONDUCTOR processing, PETROLEUM, CHEMICAL industry as well as HIGH TEMPERATURE applications.

FKM AED ( Anti explosive decompression)

- Anti-Explosive Decompression (AED) seals and O-rings are typically used in high pressure applications encountered in the oil & gas industry.
- Explosive Decompression (also referred to as Rapid Gas Decompression or RGD) is a failure mechanism of elastomer seals and O-rings that is caused by a rapid reduction in pressure of a gaseous media. Gas that has permeated into the elastomer seal expands violently when the pressure is released rapidly causing fissuring and seal failure.
FFKM applications
FKM AED application
Crown Rubber

Product

Speciality elastomer products

Crown Rubber
- With a wide range of sizes including standard as well as non standard Crown supplies O rings in any elastomeric material as per customer specification

FFKM

- FFKM: FFKM (AS PER ASTM D1418) is a perfluoro elastomer with high chemical resistance; it can withstand around 1600 different chemicals in their pure and aggressive form for a longer service life at high temperature.
- The FFKM raw material we use is manufactured and supplied by 3M, a world renowned company who have validated our Processing parameters for FFKM moulding finished components.
- Lower swell leads to less degradation thus reducing maintenance.
- High temperature resistance with low compression set results in longer service life.
- FFKM is used where AGGRESSIVE CHEMICAL ENVIRONMENTS are present, wherein other elastomers cannot sustain.
- FFKM is being used in SEMICONDUCTOR processing, PETROLEUM, CHEMICAL industry as well as HIGH TEMPERATURE applications.

FKM AED ( Anti explosive decompression)

- Anti-Explosive Decompression (AED) seals and O-rings are typically used in high pressure applications encountered in the oil & gas industry.
- Explosive Decompression (also referred to as Rapid Gas Decompression or RGD) is a failure mechanism of elastomer seals and O-rings that is caused by a rapid reduction in pressure of a gaseous media. Gas that has permeated into the elastomer seal expands violently when the pressure is released rapidly causing fissuring and seal failure.
FFKM application
FKM AED application

Contact Us

CROWN RUBBER PRODUCTS
J-221, MIDC, Bhosari, Pune 411026. INDIA.

Email

Write to us

Crown Rubber Copyright © 2016 .All Rights Reserved
Best viewed in IE 10+, Firefox 20+, Chrome , Safari5+, Opera12+